Railcar Unloading  |  Boiler Flame Monitoring  |  Hearing Protection  |  Head Protection  |  Alignment Lasers

   Pocket Anemometer  |  Fire Detection Conveyor Belt Acc.  |  Flow-Aids  Mill Fire Detection  |  Precast Equip.

   Power Generation  |  Underground Mining & Tunneling  |  Bakeries / Food Production  |  Pharmaceuticals
   Precast / Prestress Concrete  |  Foundries  |  Grain / Flour Processing  |  Cement Handling    |  MORE...


 


 

  The PMA-2001 Pocket Mining Anemometer is a technological advance in ventilation reading.  Battery powered and small enough to fit into a shirt pocket, the Pocket Anemometer is specifically designed for use in underground mining and is certified as intrinsically safe by MSHA*.  The PMA-2001 makes ventilation readings easier and faster than ever before.

SIMPLE 2 PUSH BUTTON CONTROL
Rubber covered push-buttons select between (a) 60-second timed linear feet mode and (b) moving 3-second average speed mode. 

DUSTPROOF / WATERPROOF
Designed for the rigors of a mining environment, the pocket anemometer is so well sealed, it can be submerged in water.  If dropped into a puddle or sump, it floats.

NO CALIBRATION
No adjustments or calibration are required.  After approximately 100 hours of use, the impeller assembly easily slides out for replacement.  This is all that is required to ensure precise readings with the Pocket Anemometer.

AUTOMATIC 60 SECOND TIMED MODE
Watch where you are walking, instead of staring at your wristwatch.  With the push of a button, the PMA-2001 automatically takes a 60 second reading.  It can also be stopped for partial readings of feet-of-air.

QUICK SPOT CHECKS
Feet per minute mode allows for immediate checks of airspeeds behind line curtains, on long wall faces, over conveyor belts, or anywhere air flow must be verified.

Take your leather pouch off of your tool belt.  The PMA-2001 includes its own case and braided lanyard.  Now, you can free up some space on your belt, and put your old anemometer in the mining museum.

*MSHA Approval No. 2G-4125-0


Finally, there is an easier way to take air flow readings in underground mines.  The result of years of research and development, the patented PMA-2001 is small and lightweight, yet rugged and water resistant, able to withstand the harshest mining environments.

MODES:
(a) In 60-second mode, simply walk the PMA-2001 across the entry; automatically stops counting after 60 seconds.  (b) For quick spot checks, Feet per minute mode provides a moving 3-second average of airspeeds in feet per minute. 



Sealing:
electronics enclosure IP67, water resistant to 3ft.[1m]  Floats.
Shock: drop tested to 6ft.[2m]
Battery: user-replaceable CR2032 coin cell; typical life: 400 hours
Display: reflective 4-digit LCD; digit height=0.4in. [10mm]

PMA-2001 with case

Dimensions:  4.8 x 1.7 x 0.6 in. [122 x 42 x 14 mm]; case 4.6 x 1.8 x 0.7 in. [117 x 46 x 19 mm]; lanyard 10in. [0.5m]



 Download information


1-800-852-6529

About MPS Inc.    |    Contact Us    |    Request Info

 Safety and Efficiency in Industry Since 1982.

Copyright 2007 MPSWeb